products
HomeOur ServicesYBS-1672 Sealing Silicone Grease
YBS-1672 Sealing Silicone Grease
YBS-1672 Sealing Silicone Grease
YBS-1672 Sealing Silicone Grease

YBS-1672 Sealing Silicone Grease

YBS-1672
YBS-1672 sealing silicone grease is made of high-performance silicone oil and high-purity inorganic thickener, with a variety of additives and structural improvement agent refined.
Performance Advantage
Excellent high temperature sealing performance.
Excellent sealing performance and high and low temperature performance, working temperature -40~220 degrees.
The excellent oil film composition of the base oil gives the grease higher anti-friction and wear characteristics. 
Excellent high temperature and adhesion properties, low friction coefficient and high load carrying capacity.
Excellent plastic compatibility performance.
Good insulating properties, strong material adaptability, compatible with most plastics and silicone.
Excellent corrosion protection performance
Excellent rust and corrosion resistance, effectively reduce the maintenance cost of lubricated parts by 60%.
copper color, non-staining, acid and alkali corrosion resistance and non-corrosive metal, resistance to resist hot and cold water.
Enhanced extreme pressure, anti-wear properties.
Excellent load-bearing capacity and lubrication performance, lower wear coefficient, in high temperature and high load conditions to reduce lubricated parts wear 80%. Wear-resistant, anti-shaft locking, even under high surface pressure can prevent hysteresis phenomenon.
Application
Sealing and lubrication of low-speed sliding parts such as various valves, cylinders, plugs, joints and so on.Lubrication and sealing between metal and metal, metal and plastic moving parts.Apply to the lubrication and sealing of the ground glass joints and glass piston in the vacuum system with high vacuum degree up to 7.0×10-7KPa.Lubrication and sealing of lubrication parts of various toys, aquariums, kitchen appliances and sanitary equipments in water environment.Lubrication and sealing of lubricated parts of optical equipment, instruments and meters.Sealing and lubrication of low-speed sliding parts of glass, ceramic or metal valves, solenoid valves, etc. in contact with chemicals.Apply to chemical contact and glass, ceramic or metal lubrication and anti-corrosion.Applicable to the damping of potentiometer, insulation and sealing of electrical appliances.Liquid coupling filling medium, automotive brake pumps, O-ring sealing and lubrication.

Item

Quality Indicators

Test Method

Appearance

White translucent ointment

Visual inspection

NLGI Grade, #

3

GB/T 269

Working taper, (25°C), 0.1mm

220-250

GB/T 269

Dropping point

No

GB/T 4929

Oil separation degree (100℃, 24h),% ≤

1.5

HG/T2502-1993

Volatile matter content,% ≤

1.4

HG/T2502-1993

Waterproof sealing ≥

3

HG/T2502-1993

Corrosivity test

None

HG/T2502-1993

Electrical strength, Mv/m

14.6

HG/T2502-1993

Operating temperature, ℃

-40-220

--
×

Contact Us

captcha